Alignment & Adjustments
6.2.4 Fuser Area
If the paper jams in the fuser area, "Paper Jam 1" appears on the display:
NOTE: The fuser area is hot. Take care when removing paper from the machine.
1) Lift the release lever to open the side cover.
2) Pull down on the fuser lever as shown below.
This will release pressure on the paper. If paper is
not seen in this area, skip to the Exit Area.
NOTE: Do not pull paper up through the fusing unit.
Unfused toner may adhere to the area, result-
ing in smudged copies.
Service Manual
6-6
3) Remove the jammed paper, in the direction shown.
4) Push the fuser lever up, and then close the side
cover.
Samsung Electronics