Table of Contents
Advertisement
Make sure to read, understand and follow the Important Safeguards and Warnings in this Manual.
Date:
Next Due Date:
6,000 miles
48,000 miles
Schedule 10,000 Cycle Service
NOTE: Schedule service at 9,500 cycles when QUANTUM® beeps twice for 1 minute at start up.
CHECK
Reset Switch
Marker Light
is "ON"
Stow to Deploy
Position
Bump 'n Go
Downward
Bump 'n Go
Outward
Bump 'n Go
Upward
Bump 'n Go
Docking
Block
Bump 'n Go
Driver
Interface,
Master Switch
LED Light "ON"
Driver
Interface,
1
Occupant Switch
LED Light "ON"
2
PREVENTATIVE MAINTENANCE CHECKLIST
Bus #:
Mechanic:
12,000 miles
144,000 miles
Service Date:
IMAGE
WORKING
Unit #:
Unit Cycle Count:
24,000 miles
other
ONE CYCLE
Stowed, Secured, Stowed
NOT
FIXED
WORKING
44
COMMENTS
Press Reset Switch to turn the QUANTUM® "OFF" and "ON".
Check
Bump 'n Go
by pressing Occupant Interface and
placing an obstacle in front of the Arm's pathway.
Do NOT use any body parts as an obstacle.
(Arms attempt to finish function 3 times.)
When QUANTUM® Arms are Released, #1 is lit and when
they are Secured, #2 is lit.
Hide quick links:
Advertisement
Table of Contents
