Maintenance And Care - Q'STRAINT ONE Use And Care Manual

Vehicle Owner's Name___________________________________________________________________________________________
Vehicle Identification#____________________________ Serial# of Q'STRANT ONE SYSTEM__________________________
1. The following items should be inspected and serviced by an experienced and trained technician during the scheduled
maintenance of the Q'STRAINT ONE System.
❏
Clean all debris from floor anchorages.
❏
Clean all Q'STRAINT ONE system retractors.
❏
Verify that all manual release systems are functioning properly.
❏
Verify that all Q'straint one system retractors are working properly.
❏
Verify that occupant securement system (shoulder and lap belts) are working properly.
❏
Verify that all seatbelt systems are not worn or frayed. Replace as needed.
❏
Verify that occupant securement system is not damaged or corroded. Replace if needed.
❏
Verify that floor anchorages are not damaged or corroded. Replace if needed.
❏
Verify that all mounting bolts are tight.
❏
Inspect all webbing for fraying. Replace any that have frayed.
❏
Inspect entire system to make sure everything is working properly and replace anything that is needed.
2. Any deficiencies shall be noted below and rectified before the Q'STRAINT ONE is released to the consumer for use.
3. If the repairing technician has any issues not covered by this document or is not clear on what corrective action
needs to be taken, they MUST consult the nearest Q'STRAINT
Deficiencies Noted: ______________________________________________________________________________________________
_________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________
Action Taken:____________________________________________________________________________________________________
_________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________
Dealership:_______________________________________________
SYSTEM

Maintenance and Care

Date _____________________________________
office listed on the back page of this manual.
®
Technician:__________________________________________