Maintenance And Care; Warranty - Q'STRAINT SURE-LOK DOUBLE INERTIA OCCUPANT BELT Use And Care Manual

Table of Contents

The following items should be inspected and serviced by an experienced and trained technician during the scheduled

maintenance of the Double Inertia Occupant Belt with a 4-Point Wheelchair Securement System.

• Always keep belts clean and off the floor by returning them to the retractor stowage.

• All systems and components MUST be regularly inspected, tightened, cleaned, and maintained.

• Clean webbing periodically with mild soap and water. After cleaning, fully extend belts and position them to prevent water

from entering retractors until completely dry.

• Prevent contamination of the webbing by keeping it away from polishes, oils or other chemicals, particularly battery acid.

• Occasionally, lubricate buckles and fittings without contaminating the webbing.

• Frayed, contaminated or damaged webbing as well as broken or worn components MUST be replaced immediately.

• Systems or components exposed to a vehicle accident, showing signs of missing parts, damage or wear

MUST be replaced.

2 YEAR WARRANTY - ALL SYSTEMS, PRODUCTS & ACCESSORIES

In order to take full advantage of Q'Straint's warranty, register your product online at: www.qstraint.com/registration

PLEASE DO NOT MAIL IN THIS REGISTRATION. Before going online, have your vehicle's registration handy as well as the equipment's:

Q'STRAINT'S LIMITED WARRANTY: Q'Straint® warrants this product conformance to our manufacturing specifications and to be free from defects in materials

and workmanship. Q'Straint® or its authorized dealer will (at its sole discretion), repair or replace the defective component(s) free of charge. This warranty does

not cover the cost of assembly or disassembly, transportation, labor, or any other incidental costs involved in the removal of a defective part or the installation of

the replacement part.

Q'Straint® or its authorized dealers reserves the right to inspect the product to verify the claimed defect has not been caused by non-Q'Straint® approved

maintenance or by foreign particles or substances. This Warranty does not apply to defects that result from accident, misuse or abuse, intentional damage, fire,

flood, alteration or modification of the product, negligence, exposure, or use of the product in a manner inconsistent with its intended use.