Q'STRAINT QUANTUM Installation Manual page 14

Release
Aisle side Rotational Arm releases the WMD and goes back to the Stow position while
Non-Rotational Arm moves out.
Blinking lights on Marker Light, Occupant Interface and Occupant Switch on Driver
Interface will change to solid lights while Alert Beep goes from a steady beep to silent.
One Cycle
From Stow Position to Secure Position back to Stow Position.
SYSTEM DEFINITIONS
Secure
After the QUANTUM® captures the WMD, operator presses the Secure Button
Squeeze) on Driver Interface to secure the WMD in place. Both Arms will hold the WMD in
place and will continue to maintain their grip throughout the trip.
Blinking lights on Marker Light, Occupant Interface and Occupant Switch on Driver
Interface will change to solid lights while Alert Beep goes from a steady beep to silent.
14
(Final