Installation; Package Checklist; Rack Mount Safety Instructions - Transition Networks SM8TAT2SA-DC Install Manual

Transition Networks

Installation

This section describes switch mounting, grounding, cable connection, configuration, and power connection.
Caution: Before proceeding make sure you have read
Supply Warnings & Cautions

Package Checklist

Verify that the box contains the following items:
□ One Ethernet Switch
□ Two Rack Mount brackets
□ Four rubber feet
□ One printed Quick Start Guide
□ One documentation postcard
Contact you sales representative if you have not received these items.
Save the packaging for possible future use.

Rack Mount Safety Instructions

The instructions below (or similar) are intended for rackmount installation environments:
1. Elevated Operating Ambient: if installed in a closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment may exceed room ambient. Install the equipment in an environment
compatible with the maximum ambient temperature (Tma) specified.
2. Reduced Air Flow: install the equipment in a rack so that the amount of air flow required for safe operation
is not compromised.
3. Mechanical Loading: Mount the equipment in the rack so that a hazardous condition does not occur due to
uneven mechanical loading (weight distribution/rack balance).
4. Circuit Overloading: give consideration to the connection of the equipment to the supply circuit and the
effect that overloading of the circuits might have on overcurrent protection and supply wiring. Consider all
equipment nameplate ratings when addressing this concern.
5. Reliable Earthing: maintain reliable earthing of rack-mounted equipment; pay particular attention to supply
connections other than direct connections to the branch circuit (e.g., use of power strips).
6. It is your responsibility to ensure that the final combination of equipment and rack complies with all
applicable safety standards and local electric code requirements.
33814 Rev. A
!!"on page 23.
https://www.transition.com
"Safety Warnings and Cautions" on page 2, and
SM8TAT2SA-DC Install Guide
"Power
Page 17 of 43