Transition Networks SM8TAT2SA-DC Install Manual page 9

Transition Networks
Dual Image
UPnP
DHCP Server
SNMP
Firmware Upgrade
NTP
Other
Management
Device Management System (DMS)
Topology view: Support intuitive way to configure and manage switches and devices with
Graphical visual relations.
Monitoring Floor view: Easily drag and drop PoE devices and help you to build smart workforces.
Map view: Efficiently drag and drop devices and monitor surroundings on Google maps.
The front panel LEDs flash for 15 seconds to visually identify the switch.
Find My Switch
Display visual chart of network traffic of all devices and monitor every port at any time.
Traffic Monitoring
Network diagnostic between master switch and devices. Supports protection mechanism,
Troubleshooting
such as rate-limiting to protect your devices from brute-force downloading.
Power over Ethernet (PoE)
Port Configuration
PoE Scheduling
Auto Power Reset
Power Delay
33814 Rev. A
Independent primary and secondary images for backup while upgrading
Universal Plug and Play enables device-to-device interoperability
Support DHCP server to assign IP to DHCP clients
SNMP v1, v2c, v3 with traps, and SNMP v 3 user-based security model (USM)
Web browser upgrade (HTTP/ HTTPs) and TFTP
Network Time Protocol (NTP) is a networking protocol for clock synchronization
between computer systems over packet-switched
HTTP/HTTPs; DHCP Client; Cable Diagnostics; Syslog; IPv6 Management
Supports per port PoE configuration function
Supports per port PoE scheduling to turn on/off the PoE powered devices (PDs).
Automatically checks the link status of PDs, and reboots PDs if there are no responses.
The switch provides power to the PDs based on delay time when PoE switch boots up,
in order to protect switch from misuse of the PDs
https://www.transition.com
SM8TAT2SA-DC Install Guide
Page 9 of 43