Using A Digital Certificate - Epson WorkForce Enterprise WF-C21000 Series User Manual

Administrator Information
Items
Community Name (Read/Write)
SNMPv3 Settings
Items
Enable SNMPv3
User Name
Authentication Settings
Algorithm
Password
Confirm Password
Encryption Settings
Algorithm
Password
Confirm Password
Context Name
Related Information
"Controlling protocols" on page 558
&
"Protocols you can Enable or Disable" on page 558
&

Using a Digital Certificate

About Digital Certification
❏ CA-signed Certificate
This is a certificate signed by the CA (Certificate Authority.) You can obtain it to apply to the Certificate
Authority. This certificate certifies the existence of the printer is and used for SSL/TLS communication so that
you can ensure the safety of data communication.
When it is used for SSL/TLS communication, it is used as a server certificate.
When it is set to IPsec/IP Filtering, IEEE802.1x communication, or S/MIME, it is used as a client certificate.
>
Advanced Security Settings
Setting value and Description
Enter 0 to 32 ASCII (0x20 to 0x7E) characters.
Setting value and Description
SNMPv3 is enabled when the box is checked.
Enter between 1 and 32 characters using 1 byte characters.
Select an algorithm for an authentication for SNMPv3.
Enter the password for an authentication for SNMPv3.
Enter between 8 and 32 characters in ASCII (0x20-0x7E). If
you do not specify this, leave it blank.
Enter the password you configured for confirmation.
Select an algorithm for an encryption for SNMPv3.
Enter the password for an encryption for SNMPv3.
Enter between 8 and 32 characters in ASCII (0x20-0x7E). If
you do not specify this, leave it blank.
Enter the password you configured for confirmation.
Enter within 32 characters or less in Unicode (UTF-8). If you
do not specify this, leave it blank. The number of characters
that can be entered varies depending on the language.
562
>
Using a Digital Certificate