Saving Power; Saving Power (Control Panel) - Epson WorkForce Enterprise WF-C21000 Series User Manual

Maintaining the Printer
Important:
c
❏ If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of
glass cleaner and a soft cloth to remove it. Wipe off all remaining liquid.
❏ Do not press the glass surface too hard.
❏ Be careful not to scratch or damage the surface of the glass. A damaged glass surface can decrease the scan
quality.
7. Return the cleaning cloth to the cleaning cloth holder.
8. Close the document cover.

Saving Power

The printer enters sleep mode or turns off automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will affect the product's energy efficiency. Please
consider the environment before making any change.
Depending on the location of purchase, the printer may have a feature that turns it off automatically if it is not
connected to the network for 30 minutes.

Saving Power (Control Panel)

1. Select Settings on the home screen.
2. Select General Settings > Basic Settings.
3. Do one of the following.
Note:
Your product may have the Power Off Settings or Power Off Timer feature depending on the location of purchase.
❏ Select Sleep Timer or Power Off Settings > Power Off If Inactive or Power Off If Disconnected, and then
make settings.
❏ Select Sleep Timer or Power Off Timer, and then make settings.
> >

Saving Power

Saving Power (Control Panel)
204