Epson WF-C20600 Series Hardware Setup Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. WF-C20600
  6. Hardware setup manual

Epson WF-C20600 Series Hardware Setup Manual

Open platform
Hide thumbs Also See for WF-C20600 Series:
Table of Contents

Advertisement

Quick Links

Epson Open Platform
Hardware Setup Guide
NPD6393-00 EN

Advertisement

Table of Contents
loading

Related Manuals for Epson WF-C20600 Series

Summary of Contents for Epson WF-C20600 Series

  • Page 1 Epson Open Platform Hardware Setup Guide NPD6393-00 EN...

  • Page 2: The Content Of This Document

    Hardware Setup Guide About this Guide About this Guide The content of this document This guide explains how to set up Epson Open Platform on the following compatible multifunction devices. ❏ WF-C20600 series ❏ WF-C20750 series ❏ WF-C21000 series Using this Guide...

  • Page 3: Table Of Contents

    2. Setting Up Epson Open Platform Activating Epson Open Platform....10 Validating of Epson Open Platform... . .11 3.

  • Page 4: Introduction

    This guide explains how to set up the Epson Open Platform on a compatible device. Setup procedure Follow these steps to configure Epson Open Platform. Contact your dealer to acquire the firmware or product key. Procedure Operations Location...

  • Page 5: Preparing For System Configuration

    Product key This is the product key to activate Epson Open Platform. To acquire this product key, you need the serial numbers of the respective MFDs. You can find the serial number on the product’s Guarantee Form, or on the label on the rear or side of the product.
  • Page 6 Hardware Setup Guide 1. Preparing for system configuration 2. Select Enter manually (you can only enter one serial number) from Serial number (required), and then enter the serial number of the MFD. 3. Select an answer from Introduction destination information (required). 4.
  • Page 7 Acquiring in bulk 1. Access the following website from the system administrator’s computer. https://openplatform.epson.biz/license-op/inputInformation.html 2. Click Sample under Readable text file and download a sample file for the serial number list. 3. Change the sample file as necessary, and then save the serial number list file.
  • Page 8 Hardware Setup Guide 1. Preparing for system configuration 4. Select Read from text file (you can enter multiple serial numbers) from Serial number (required). 5. Click Browse, select the serial number list file you created in step 3, and then click Open. 6.
  • Page 9 Hardware Setup Guide 1. Preparing for system configuration 9. Click Export CSV to download the content displayed on the screen in CSV format. 10. When you want to acquire a product key for another MFD, click Continue issuing. Return to step 3, and then follow the same steps. To finish, close the screen.

  • Page 10: Setting Up Epson Open Platform

    Contact your sales company or local dealer for more details. 6. Open the CSV file that contains the license issued for Epson Open Platform, and then copy the product key that is paired with the serial number.

  • Page 11: Validating Of Epson Open Platform

    ❏ Web Config A product key has been entered in the Epson Open Platform tab > Product key > Enter product key, and the Epson Open Platform tab > Authentication System is displayed on the left of the menu tree.

  • Page 12: Authentication Device

    Hardware Setup Guide 3. Authentication Device 3. Authentication Device If you want to use the authentication device in the authentication system, connect the authentication device with a USB cable and check that it works. Connecting the Authentication Device You can connect the authentication device by using a USB cable. Important: ❏...
  • Page 13 Hardware Setup Guide 3. Authentication Device 3. Raise the cover, and then remove it. 4. Connect the card reader’s USB cable to internal USB slot. 5. Leave a suitable length of cable, and then connect the USB cable. 6. Put the cover back on. If the cover is secured by the screw, tighten the screw to secure it in place.

  • Page 14: Operation Check

    Hardware Setup Guide 3. Authentication Device 7. Place a card reader on the cover, and then secure it with double-sided tape if necessary. Important: Route the connection cable for the authentication device so that it does not interfere with the scanner unit and control panel.

  • Page 15: Solving Problems

    Read confirmation You can check that authentication cards can be read in Web Config. 1. On a computer, open your web browser, and then open the MFD’s Web Config by entering "http://<epson- device-IP>". 2. Navigate to System Settings tab, and then select Card Reader.
  • Page 16 ❏ Make sure you entered the correct product key in the Web Config. The product key is paired with the serial number. Access the content download site and acquire the product key if you do not know how to pair the product key. The same product key is issued to one serial number. https://openplatform.epson.biz/license-op/inputInformation.html...

  • Page 17: Appendix

    Hardware Setup Guide Appendix Appendix Trademarks ❏ EPSON and EXCEED YOUR VISION are registered trademarks of the Seiko Epson Corporation. ❏ Other product names may be trademarks or registered trademarks of their respective owners. © Seiko Epson Corporation 2019 Caution ❏...

This manual is also suitable for:

Wf-c20750 seriesWf-c21000 series

Table of Contents