Density; Paper Setting; Reduce/Enlarge; Original Type - Epson WorkForce Enterprise WF-C21000 Series User Manual

Copying
>
Basic Menu Options for Copying

Density:

Increase the level of density when the copying results are faint. Decrease the level of density when ink
smears.

Paper Setting:

Select the paper source that you want to use. When Auto is selected, a suitable size is fed
automatically depending on the auto detected original size and the specified magnification ratio.

Reduce/Enlarge:

Configures the magnification ratio of the enlargement or reduction. Tap the value and specify the
magnification used to enlarge or reduce the original within a range of 25 to 400%.
❏ Auto
Detects the scan area and automatically enlarges or reduces the original to fit to the paper size you
selected. When there are white margins around the original, the white margins from the corner
mark (
may be cropped.
❏ Reduce to Fit Paper
Copies the scanned image at a smaller size than the Reduce/Enlarge value to fit within the paper
size. If the Reduce/Enlarge value is larger than the paper size, data may be printed beyond the
edges of the paper.
❏ Actual Size
Copies at 100 % magnification.
❏ A3→A4 and others
Automatically enlarges or reduces the original to fit to a specific paper size.

Original Type:

Select the type of your original. Copies in optimal quality to match the type of original.

2-Sided:

Select 2-sided layout.
❏ 1→1-Sided
Copies one side of an original onto a single side of paper.
❏ 2→2-Sided
Copies both sides of a double-sided original onto both sides of a single sheet of paper. Select the
orientation of your original and the binding position of the original and the paper.
) of the scanner glass are detected as the scan area, but the margins at the opposite side
112