Epson WorkForce Enterprise WF-C21000 Series User Manual page 410

Product Information
Power Off Settings:
Your product may have this feature or the Power Off Timer feature depending on the location of
purchase.
❏ Power Off If Inactive
Select this setting to turn the printer off automatically if it is not used for a specified period of
time. Any increase will affect the product's energy efficiency. Please consider the environment
before making any change.
❏ Power Off If Disconnected
Select this setting to turn the printer off after 30 minutes when all ports including the LINE port
are disconnected. This feature may not be available depending on your region.
This setting is disabled when optional ethernet board or fax board is installed.
Date/Time Settings:
❏ Date/Time
Enter the current date and time.
❏ Daylight Saving Time
Select the summer time setting that applies to your area.
❏ Time Difference
Enter the time difference between your local time and UTC (Coordinated Universal Time).
Country/Region:
Select the country or region in which you are using your printer. If you change the country or region,
your fax settings return to their defaults and you must select them again.
Language:
Select the language used on the LCD screen.
Start-up Screen:
Specify the initial menu displayed on the LCD screen when the printer turns on and Operation Time
Out is enable.
Edit Home:
Change the layout of the icons on the LCD screen. You can also add, remove, and move icons.
Wall Paper:
Change the background color of the LCD screen.
You can also select a background image from a memory device. Only JPEG format is supported.
Operation Time Out:
Select On to return to the initial screen when no operations have been performed for the specified
time. When user restrictions have been applied and no operations are performed for the specified
time, you are logged out and returned to the initial screen. When printing is paused from the status
monitor or by using the cancel or stop button, and then no operations are performed for the specified
time, printing resumes automatically. If you select Off for this feature, it does not automatically
resume after printing has been paused.
> >
Settings Menu List General Settings
410