Epson WorkForce Enterprise WF-C21000 Series User Manual page 463

Product Information
EPSON Code39 Num
EPSON Code128
❏ Code128 fonts support code sets A, B, and C. When the code set of a line of characters is changed in the middle
of the line, a conversion code is automatically inserted.
❏ The height of the bar code is automatically adjusted to 15% or more of its total length, in conformance to the
Code128 standard. For this reason, it is important to keep at least one space between the bar code and the
surrounding text to prevent overlapping.
❏ Some applications automatically delete the spaces at the end of lines or change multiple spaces into tabs. Bar
codes containing spaces may not be correctly printed from applications that automatically delete spaces from
the ends of lines or change multiple spaces into tabs.
❏ When printing two or more bar codes on one line, separate the bar codes with a tab, or select a font other than a
BarCode Font and input the space. If a space is input while a Code128 font is selected, the bar code will not be
correct.
Character type
Number of characters
Font size
The following codes are inserted automatically and need not be input by hand:
❏ Left/Right quiet zone
❏ Start/Stop character
❏ Check digit
❏ Change code set character
Print sample
EPSON Code128
EPSON ITF
❏ The EPSON ITF fonts conform to the USSInterleaved 2-of-5 standard (American).
❏ Four EPSON ITF fonts are available, allowing you to enable and disable the automatic insertion of check digits
and OCR-B.
❏ The height of the bar code is automatically adjusted to 15% or more of its total length, in conformance to the
Interleaved 2-of-5 standard. For this reason, it is important to keep at least one space between the bar code and
the surrounding text to prevent overlapping.
> >
Font Specifications Epson BarCode Fonts (Windows Only)
All ASCII characters (95 in total)
No limit
26 pt to 96 pt. Recommended sizes are 26 pt, 52 pt and 78 pt.
EPSON Code39 CD Num
463