Table of Contents
Advertisement
IEEE 802.1X Network Status
You can check the status of the IEEE 802.1X network settings by printing a status sheet from your
product.
The network status sheet displays the information in this table for IEEE 802.1X networks.
Status ID
Disable
EAP Success
Authenticating
Config Error
Client Certificate Error
Timeout Error
User ID Error
Server ID Error
Server Certificate Error
CA Certificate Error
EAP Failure
Parent topic:
Using a Digital Certificate
Follow the instructions in these sections to configure and use digital certificates using Web Config.
About Digital Certification
Obtaining and Importing a CA-signed Certificate
Status description
IEEE 802.1X is disabled
IEEE 802.1X authentication is confirmed and the network connection is
available
IEEE 802.1X authentication in progress
Authentication failed because the user ID was not set
Authentication failed because the client certificate is out of date
Authentication failed because there is no answer from the RADIUS server
and/or authenticator
Authentication failed because the product's user ID and/or certificate
protocol is incorrect
Authentication failed because the server ID on the server certificate and
the server's ID do not match
Authentication failed because the server certificate is out of date or the
chain of the server certificate is incorrect
Authentication failed because the CA certificate is incorrect, not imported,
or out of date
Authentication failed because the client certificate is incorrect (EAP-TLS
or PEAP-TLS), or the user ID or password is incorrect
(PEAP/MSCHAPv2)
Connecting the Product to an IEEE 802.1X Network
348
Advertisement
Table of Contents
