Main Menu Mode; Parameter Selection - GE AF-650 GP Programming Manual

2.1.9 Main Menu Mode

Start the Main Menu mode by pressing the [Main Menu] key. The read-out
shown to the right appears on the display.
The middle and bottom sections on the display show a list of parameter
groups which can be chosen by toggling the up and down buttons.
Each parameter has a name and number which remain the same regardless of the programming mode. In the Main Menu mode, the parameters are divided into
groups. The first digit of the parameter number (from the left) indicates the parameter group number.
All parameters can be changed in the Main Menu. However, depending on the choice of configuration (par. H-40 Configuration Mode), some parameters can be
"missing". E.g. open loop hides all the PID parameters, and other enabled options make more parameter groups visible.

2.1.10 Parameter Selection

In the Main menu mode, the parameters are divided into groups. You select
a parameter group by means of the navigation keys.
After selecting a parameter group, choose a parameter by means of the nav-
igation keys.
The middle section on the display shows the parameter number and name
as well as the selected parameter value.
2.1.11 Changing Data
The procedure for changing data is the same whether you select a parameter in the Quick menu or the Main menu mode. Press [OK] to change the selected
parameter.
The procedure for changing data depends on whether the selected parameter represents a numerical data value or a text value.
AF-650 GP Programming Guide
2
21