Parameter Set-Up - GE AF-650 GP Programming Manual

AF-650 GP Programming Guide
Status screen I:
This read-out state is standard after start-up or initialization.
Use [INFO] to obtain information about the measurement links to the dis-
1.1
played operating variables (1.1, 1.2, 1.3, 2 and 3).
See the operating variables shown in the screen in this illustration.
2
1.2
2
3
1.3
Status screen II:
See the operating variables (1.1, 1.2, 1.3 and 2) shown in the screen in this
illustration.
In the example, Speed, Motor current, Motor power and Frequency are se-
lected as variables in the first and second.
Status screen III:
This state displays the event and action of the Logic Controller. For further
information, see section Logic Controller.

2.1.6 Parameter Set-Up

The frequency converter can be used for practically all assignments, which is why the number of parameters is quite large. The frequency converter offers a
choice between two programming modes - a Main Menu and a Quick Menu mode.
The former provides access to all parameters. The latter takes the user through a few parameters making it possible to start operating the frequency converter.
Regardless of the mode of programming, you can change a parameter both in the Main Menu mode and in the Quick Menu mode.
18