GE AF-650 GP Programming Manual page 129

PB-23 Parameters for Signals
Array [1000]
Read only
Option:
3 PB-27 Parameter Edit
Option:
[0] Disabled
[1] * Enabled
PB-28 Process Control
Option:
[0] Disable
[1] * Enable cyclic master
PB-44 Fault Message Counter
Range:
0* [0 - 65535]
PB-45 Fault Code
Range:
0* []
PB-47 Fault Number
Range:
0* []
PB-52 Fault Situation Counter
Range:
0* [0 - 1000]
PB-53 Profibus Warning Word
Range:
0* []
Read only
128
Function:
This parameter contains a list of signals available for selection in par. PB-15 PCD Write Configuration and
par. PB-16 PCD Read Configuration.
Function:
Parameters can be edited via Profibus, the standard RS485 interface, or the Keypad.
Disables editing via Profibus.
Enables editing via Profibus.
Function:
Process control (setting of Control Word, speed reference, and process data) is possible via either Profibus
or standard Network but not both simultaneously. Local control is always possible via the Keypad. Control
via process control is possible via either terminals or Network depending on the settings in par.
O-50 Coasting Select to par. O-56 Preset Reference Select.
Disables process control via Profibus, and enables process control via standard Network or Profibus
Master class 2.
Enables process control via Profibus Master Class 1, and disables process control via standard Network
or Profibus Master class 2.
Function:
This parameter displays the number of error events stored in par. PB-45 Fault Code and par. PB-47 Fault
Number. The maximum buffer capacity is eight error events. The buffer and counter are set to 0 upon
reset or power-up.
Function:
This buffer contains the alarm word for all alarms and warnings that have occurred since last reset or
power-up. The maximum buffer capacity is eight error events.
Function:
This buffer contains the alarm number (e.g. 2 for live zero error, 4 for mains phase loss) for all alarms and
warnings that have occurred since last reset or power-up. The maximum buffer capacity is eight error
events.
Function:
This parameter displays the number of error events which have occurred since last reset of power-up.
Function:
AF-650 GP Programming Guide