Id-## Drive Information - GE AF-650 GP Programming Manual

3.15 Parameter Data Check
3.15.1 Last 10 Changes
Displays a list of the 10 last changes made to the parameters in the present parameter setup. This allows for any corrections of the last 10 changes.
3.15.2 Since Factory Settings
Displays a list of all the parameter changes since the factory settings of the drive or since the last factory restore of parameters.

3.16 ID-## Drive Information

Parameter group related to drive information such as operating data, hardware configuration and software version.
3.16.1 ID-0# Operating Data
Parameters to view operating hours. kWh counters, power ups, etc.
ID-00 Operating Hours
Range:
0 h* [0 - 2147483647 h]
ID-01 Running Hours
Range:
0 h* [0 - 2147483647 h]
ID-02 kWh Counter
Range:
0 kWh* [0 - 2147483647 kWh]
ID-03 Power Up's
Range:
0* [0 - 2147483647]
ID-04 Over Temp's
Range:
0* [0 - 65535]
ID-05 Over Volt's
Range:
0* [0 - 65535]
ID-06 Reset kWh Counter
Option:
[0] * Do not reset
[1] Reset counter
Function:
View how many hours the frequency converter has run. The value is saved when the frequency converter
is turned off.
Function:
View how many hours the motor has run. Reset the counter in par. ID-07 Reset Running Hours Counter.
The value is saved when the frequency converter is turned off.
Function:
Registering the power consumption of the motor as a mean value over one hour. Reset the counter in
par. ID-06 Reset kWh Counter.
Function:
View the number of times the frequency converter has been powered up.
Function:
View the number of frequency converter temperature faults which have occurred.
Function:
View the number of frequency converter overvoltages which have occurred.
Function:
Select Do not reset [0] if no reset of the kWh counter is desired.
Select Reset [1] and press [OK] to reset the kWh counter to zero (see par. ID-02 kWh Counter).
AF-650 GP Programming Guide
3
135