AT&T SYSTEM 25 Manual page 49

Display Symbols for Screen 2. The display symbols that appear in either position 1 or
position 16 of Screen 2 and their meanings are provided in the table below.
Location Display symbol
Position 1
Position 16
Using the Display to Help You Program Your Voice Terminal
Flexible Direct Station Selection buttons, Repertory Dialing buttons, and Personal Speed
Dialing codes can be programmed. When starting to program the buttons and/or codes, the
display will show:
While dialing the numbers and/or special characters that are to be stored on a button or
programmed into a dialing code, the display will show the numbers and/or special characters
that have been dialed, as in the following example:
For more
information about programming numbers onto available voice terminal buttons, see
the entry for "Programming Numbers" on page 2-79.
2-36 Voice Terminal Features
-
This string of digits continues from Screen 1.
a This is a Third-Party call.
b The covered station was busy.
d The covered station did not answer the call.
f The call was sent using Following or Forwarding.
This is a DGC call.
g
n This is a Night Service call.
When the initial redirection symbol is a " > ",
P
the call was answered with the Pickup feature.
When the initial redirection symbol is a "}",
this is a returning parked call.
s Send All Calls was turned on by the covered station.
u This call is from a not-signed-in FPDC (SLAC display only).
PROGRAM
9*5557023
Meaning of the symbol