AT&T SYSTEM 25 Manual page 181

Viewing and Modifying Data Port Options
When is selected from the Command Mode menu, the system displays the data
<Options>
port's administered options. System default values for each option are also shown.
The table below describes user-changeable options.
Option
Speed
Parity
Permit Mismatch
Local Echo
Answer Text
Connection Indication
Recall Sequence
(disconnect)
The System Administrator can change options or can authorize data terminal users to change
their own options.
low, 300, 1200, 2400, 4800, 9600, 19200, autobaud
odd, even
Allows two data endpoints to communicate at
different rates.
Determines whether characters from the data
equipment will be echoed by System 25 during
Command Mode.
Enables call progress messages to be displayed at the
called data endpoint.
Determines whether users who have Command Mode
enabled will receive the
connection has been made.
Two short breaks or one long break; the sequence
used to disconnect a data call.
Viewing and Modifying Data Port Options
Definition
message when a
CONNECTED
4-7