AT&T SYSTEM 25 Manual page 75

To enter Local Mode, users with a LOCAL button can press LOCAL; users without a LOCAL
button press Time/Timer, if not already in Local Mode. The Local Mode will initially display
either the Clock/Calendar screen or the Timer screen, depending on which screen was last
displayed. The Following procedures assume the user is in Local Mode and that the
appropriate screen is displayed.
Setting the Clock, Time, Day, Date, or Alarm
This procedure assumes the Clock/Calendar screen is displayed.
1
Press
2
Press
3
If you want to change the setting of an additional item, return to Step 1.
Press
4
The Clock/Calendar screen appears on the display.
Using the Timer
This procedure assumes the Timer screen is displayed.
1 To start the timer, press
The timer resets to 00:00 then begins timing.
To stop the timer, press
2
3
If you want to time another event, return to Step 1.
4
Press
The Clock/Calendar screen appears on the display.
2-62 Voice Terminal Features
Set repeatedly, until the item you want to change flashes.
[ ]
Fwd or Rev to change the item's setting.
[ ] [ ]
Exit .
[ ]
[
[
.
Exit
[ ]
Start
].
Stop
].