AT&T SYSTEM 25 Manual page 95

Programming or Removing a Number by Using a Code
1
Lift the handset and listen for dial tone.
2
D i a l
3 Dial the number you want to program.
or
If you want to remove a number, continue to Step 4.
4 To indicate where this number should be stored or removed:
Press the
or
Dial the Personal Speed Dialing code ( #20 through #39),
including the
5
Listen for confirmation tone and dial tone.
6 Hang up.
Single-Line
Programming or Removing Personal Speed Dialing Codes
You can program a maximum of 25 characters into a Personal Speed Dialing code.
Programming or Removing a Number
1
Lift the handset and listen for dial tone.
2
D i a l
3
Dial the number you want to program
o r
If you want to remove a number, enter
to Step 4.
Dial the Personal speed Dialing code ( #20 through #39)
4
being added or removed, including the
5
Listen for confirmation tone and then hang up.
2-82 Voice Terminal Features
or
[FLEX DSS] [REP DIAL]
button.
and continue