AT&T SYSTEM 25 Manual page 47

Account Codes. When entering an account code, the prompt " ACCT?" and the dialed
numbers are displayed, as in the following example.
Redirected Calls. If a call is redirected to a voice terminal (that is, sent to a voice terminal
because the original voice terminal was busy, the call was unanswered, or one of the features
listed in the table on page 2-35 was in effect), the display will have a redirection symbol, a
">", at the beginning of the display. The original voice terminal's or DGC group's extension
and name will then be displayed, if available.
If a call has been redirected using the Third-Party Call Setup or the Park
NOTE:
feature, the beginning redirection symbol is a "}". If the call has been redirected from
this display voice terminal to a coverage station, a "c" will appear in the last position
of Screen 1.
A display for a redirected call has two screens. Each screen includes the following
information:
Screen 1. This screen includes a " >" or "}", followed by the original voice
terminal's PDC and name, if available.
Screen 2. This screen includes the PDC and name of the person who placed the
call, followed by a call-type symbol. Refer to the chart "Display Symbols for
Screen 2" on page 2-36 for an explanation of these symbols.
The following double-screen display shows the recipient of a redirected coverage call:
Leave Word Calling. When using the Leave Word Calling feature, the display shows the
PDC of the message recipient and an indication of whether or not the operation was
successful, as in the following displays.
2-34 Voice Terminal Features
ACCT?3579346
>360 Benson, H
323 Davis, F b
392 MSG SENT
or
392 MSG DENIED