AT&T SYSTEM 25 Manual page 194

Selector Console, 1-8, 3-13, 3-35
lights, 1-9
Send All Calls, 2-89 – 2-90, 3-2, 3-31
SEND ALL CALLS Button, 2-8
Sign In, 2-41
Sign Out, 2-41
Signaling, 2-33, 2-41
end-to-end, 4-3
manual signaling, 2-91
Single-Line Voice Terminals, 1-3, 1-6,
2-3, 2-14, 2-16 – 2-18, 2-54, 2-60,
2-63, 2-71, 2-76, 2-79, 2-82, 2-104
SLAC, 1-3, 1-7 – 1-9, 2-61, 3-1 – 3-3, 3-14,
3-18, 3-25, 3-27, 3-36, 3-42
display, 3-1
features, join, 3-29
Station Message Selection Detail Recording
(SMDR) Call Record, 2-1
SMDR Report, 2-9
Software
ACCESS, 4-13
Communication Access Manager, 4-13
4410 Terminal Emulator, 4-13
Source, 3-51
Source and Destination, 3-49
SOURCE Button, 3-19, 3-29
Speaker, 2-93
SPEAKER Button, 2-48, 2-52
Speakerphone, 2-95 – 2-96
SPEAKERPHONE Button, 2-46, 2-50
Special Characters, 2-79
Special Ringback Tone, 1-5, 2-17, 3-7
Speed Dialing, 2-57, 2-97
codes, 2-31
Splitting, 3-17
one-way automatic, 3-51
Standard Coverage Group Receivers, 2-19
STARLAN Interface CP, 2-23
STARLAN NETWORK
data calls made with, 4-13
data terminals used with, 4-13 – 4-14
System 25 used with, 4-13
Start, 3-55
START Button, 3-20, 3-55
Station Message Waiting, 2-99
Switched Loop Attendant Console. See SLAC
Switchhook, 1-6, 2-16, 3-13
Symbols, used on display, 2-35
SYS ACC-O Button, 2-16
System 25 Voice Terminal Overview, 1-3 – 1-9
SYSTEM ACCESS Button, 1-7, 2-7, 2-11,
2-15, 2-20, 2-27, 2-32, 2-43,
2-55, 2-57 – 2-58, 3-1, 3-31
System Administrator, 2-12, 2-20, 2-23,
2-26, 3-27, 3-35
System Alarm, 3-57
System Speed Dialing, 2-97
T
TAAS Night Service, 3-31
TAAS. See Trunk-Answer-from-Any-
Station, 2-65
Temporary Hold. See Splitting
Terminal Emulation, 4-13
TEST Button, 3-57
Testing a Voice Terminal, 2-101
Testing the Consoles, 3-57
Test/Program Switch, 2-101, 3-57
Third-Party Call Setup, 2-34
using a data terminal, 4-11 – 4-12
Three-Way Call, 3-29
Time and Date, 2-31
Timer
display, 2-37
functions, setting, 2-61
Toll Restrictions, 1-3
Tone(s)
busy, 2-12
confirmation, 2-24
dequeuing, 2-13
fast busy, 2-12
priority ringing, 2-13
reorder, 2-12
ringback, 2-15
special ringback, 2-17
Touch-Tone Voice Terminals, 1-3
Transfer, 2-7, 2-55, 2-69, 2-103
TRANSFER Button, 2-57, 3-17, 3-21, 3-40
Transfer to Data, 4-5
Transferred Call(s), 2-23, 2-33
Transmission Speed, 4-1
Trunk Call(s), 2-11, 2-17, 2-23, 3-17
Trunk Groups, 2-12, 2-56
Trunk Pools, 2-12 See also Trunk Groups, 2-12
Trunk-Answer-from-Any-Station (TAAS), 2-65
night service, 3-31
Trunk-to-Trunk Transfers, 3-17, 3-21
Trunk Port
Auxiliary Trunk Port, 2-67
Ground Start Trunk Port, 2-67
Loop Start Trunk port, 2-67
Trunks
Dial-in Tie Trunk, 3-31
DID Trunk, 3-31
Remote Access Trunk, 3-31
V
Viewing Data Port Options, 4-7
Voice Mail, 2-59
Voice Message, 2-59
Voice Messaging System, 2-59
Voice Terminal(s)
data calls made with, 4-5
BIS, covering calls with, 2-45
directory, 2-25 – 2-27
display, 2-25, 2-31
multiline, 1-7. See also Multiline Voice Terminals
number supported, 1-3
rotary dial, 1-3
single-line, 1-3
touch-tone, 1-3
types supported, 1-3
Voice Terminal Features, 1-1, 2-1
account code entry, 2-1
Z
Zones, paging, 2-67, 3-33
ZTN84 Circuit Pack, 4-13
Index I-5