AT&T SYSTEM 25 Manual page 183

6
Select
7
When
NOTE:
8
If it is
This key removes any changes made prior to exiting the options.
NOTE:
Select
9
The following message is displayed:
10 Any new options are now in effect.
Modifying Data Port Speed
1
Select
The available speeds are displayed with an X under each speed that is currently enabled.
2
Move the cursor to the speed to be changed.
3
To add the speed, type a + (plus).
or
To remove the speed, type a – (minus).
NOTE:
terminal speed, add Auto (by typing a + beneath it.)
4
Making sure the cursor is not under " eXit, " press
An X is now added or removed beneath each changed speed setting.
5
Select
6
Go to Step 7 in the previous procedure, "Modifying Data Port Options. "
the new setting for the option to be changed.
all option changes are made, select
To review any changes, select
not necessary to save the changes, select
To return to the Command Mode menu, press
<Enable options> .
DISCONNECTED
in the Options menu.
<Speed>
If want the System 25 data port to autobaud to your data
you
<eXit> .
.
<eXit>
<View options> .
<Undo> ,
[RETURN]
Viewing and Modifying Data Port Options
<Undo> .
.
4-9