AT&T SYSTEM 25 Manual page 182

Viewing Data Port Options
1
Turn on the data terminal.
2
Press
The Command Mode menu is displayed.
3
Select <Options> .
A sub-menu is displayed.
4
Select
The current options are displayed.
Modifying Data Port Options
1 Turn on the data terminal.
2
Press
The Command Mode menu is displayed.
3
Select
A sub-menu is displayed.
4
Select
The first of two option menus is displayed.
NOTE:
Because there are seven options and only four can be displayed at the
same time,
If the message
user changeable.
5
Select the
A sub-menu
enabled.
NOTE:
Data Port
4-8 Data Terminal Features
and then press
[BREAK]
<View options> .
and then press
[BREAK]
<Options> .
<Change options> .
To change an option that is not displayed, select
can be used to toggle between the two menus.
<Others>
is displayed, the data port is not configured to be
DENIED
option to be changed.
for this item is displayed and an X appears under the setting that is currently
If was selected, go to the next heading, "Modifying
<Speed>
Speed, " for further instructions.
(Continued)
.
[RETURN]
.
[RETURN]
<Others> .