Send All Calls 2 - 8 - AT&T SYSTEM 25 Manual

This feature applies to multiline voice terminals only.
The Send All Calls feature allows multiline voice terminal users to turn off their ringers and
invoke a "do not disturb" condition toward incoming calls. In addition, users who have
coverage or bridged appearances will have those calls directed immediately to their covering
and/or bridging stations, without the normal system ringing delay. Send All Calls also allows
covering users to temporarily remove their voice terminals from the coverage path.
A single-ring reminder for incoming calls is optional, assigned by the System Administrator
for each Send All Calls button.
The following types of calls will always ring at a station, regardless of the status of
Send All Calls:
Automatic Intercom
Directed Night Service
Calls returning to a DTAC on RTN-BUSY or RTN-DA
Calls to a PDC that has been signed-in at a station (Following/Forwarding)
Calls to an FPDC signed in at that station will not ring.
NOTE:
A station can be administered so that pressing the SEND ALL CALLS button will send
ringing for incoming calls to its coverage stations only, to its bridging stations only, or to
both.
Ringing on Personal Lines is turned off by activation of Send All Calls whether the station is
the principal (owner) of the line or not. Personal Line calls follow the coverage arrangements
of the principal station. If the principal station is not covered, the call will simply stay at the
principal station until dropped (even if other stations with that Personal Line have coverage).
A call forwarded from a station with Send All Calls activated will not go to coverage or to
bridging stations unless the call is not answered at the forwarded-to station and returns.
After returning, the call routes according to the Send All Calls feature.
Send All Calls
Send All Calls 2-89