Syslog; Figure 30-7 Sample Error And Information Messages; Figure 30-8 System Maintenance - Syslog And Accounting - ZyXEL Communications Prestige 792H User Manual

Prestige 792H User's Guide
Step 3.
Enter 1 from Menu 24.3 — System Maintenance — Log and Trace to display the error log in
the system.
After the Prestige finishes displaying the error log, you will have the option to clear it. Samples of typical
error and information messages are presented in the next figure.
59 Thu Jan 01 00:00:03 1970 PP0f
60 Thu Jan 01 00:00:03 1970 PP00 -WARN
61 Thu Jan 01 00:00:03 1970 PP00
62 Thu Jan 01 00:00:19 1970 PP00
63 Thu Jan 01 00:00:24 1970 PP0a
Clear Error Log (y/n):

30.4.2 Syslog

The Prestige uses the UNIX syslog facility to log the CDR (Call Detail Record) and system messages to a
syslog server. Syslog can be configured in Menu 24.3.2 — System Maintenance — UNIX Syslog, as
shown next.
Press Space Bar to Toggle.
Figure 30-8 System Maintenance — Syslog and Accounting
You need to configure the UNIX syslog parameters described in the following table to activate syslog then
choose what you want to log.
30-6

Figure 30-7 Sample Error and Information Messages

Menu 24.3.2 - System Maintenance - UNIX Syslog
UNIX Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Types:
CDR= No
Packet triggered= No
Filter Log= No
PPP Log= No
Press ENTER to Confirm or ESC to Cancel:
INFO LAN promiscuous mode <0>
SNMP TRAP 0: cold start
INFO main: init completed
INFO SMT Session Begin
WARN MPOA Link Down
System Maintenance