Q: My Ta Is Connected To My Computer Using A Serial Cable. When I Try To Set My Com Speed In Windows To 230.4 Kbps (230,400), My Ta Won't Dial Out; Q: What Supplemental Phone Service Does Ta Support; Q: How Do I Do Call Waiting/Call Hold/Call Retrieve - ZyXEL Communications Omni.Net Lite Support Notes

Hide thumbs Also See for Omni.Net Lite:

Q: My TA is connected to my computer using a serial cable. When I try to

set my COM speed in Windows to 230.4 Kbps (230,400), my TA won't dial

out.

Using the 230.4 Kbps COM port speed with Windows requires a special serial

port. Most new computer's serial ports operate at up to

115.2 Kbps. To use your TA at 230.4 Kbps, check with your computer

manufacturer to see if your serial port will support that speed.

The following supplementary phone features on both of its POTS ports.

Call Waiting

Three Way Calling

Call Transfer

Call Forwarding

Terminal Portability(Suspend/Resume)

Some supplementary services may or may not be supported by your telephone

company, please check with your telephone company for the services they

offer.

Put your current call on hold and answer the incoming call, after

hearing the call waiting tone, press Flash button then press '2' button

on your telephone.

Put your current call on hold and switch to another call, press Flash

button then press '2' button on your telephone.

Hang up your current call before answering the incoming call

method1: press Flash button then press '1' button on your telephone.

method2: hang up the phone and wait for answering the incoming

call.

Hang up the current active call and switch back to the other call

method1: press Flash button then press '1' button on your telephone.

method2: hang up and wait for the phone to ring. Then pick up the

phone to return to the other call.

Omni.Net Lite Support Notes

Table of Contents