Protective Functions; Front Panel; Environmental Conditions; Mechanical Construction - TDK-Lambda GENESYS GEN 2400W Series Technical Manual

1u programmable dc power supplies
Hide thumbs Also See for GENESYS GEN 2400W Series:
Table of Contents

Advertisement

2.8 PROTECTIVE FUNCTIONS

1.Foldback protection
2. Over-Voltage protection (OVP)
3. Over-Voltage trip point
4. Output Under-Voltage limit (UVL)
5. Over-Temperature protection (OTP)

2.9 FRONT PANEL

1. Control functions
2. Display
3. Indications

2.10 ENVIRONMENTAL CONDITIONS

---
1. Operating temperature
---
2. Storage temperature
%
3. Operating humidity
%
4. Storage humidity
5.Vibration
---
6. Shock
---
7. Altitude
---
8.RoHS Compliance
---

2.11 MECHANICAL CONSTRUCTION

1. Cooling
---
2. Dimensions (WxHxD)
mm
3. Weight
kg
4. AC Input connector
---
(with protective cover)
5. Output connector
---

2.12 EMC

---
1. Applicable standards:
2. ESD
---
3. Fast Transients
---
4. Surge Immunity
---
5. Conducted Immunity
---
6. Radiated Immunity
---
7. Magnetic Field Immunity
---
8. Voltage Dips
---
9. Conducted Emissions
---
10. Radiated Emissions
---

2.13 SAFETY

1.Applicable standards
UL 60950-1, CSA 22.2 No.60950-1, IEC 60950-1, EN 60950-1
Models with Vout ≤ 40V: Output is SELV; LAN, IEEE, USB, RS-232/RS-485, Isolated Analog, J1 Remote Analog (all pins) and Remote sense pins are
2.Interface classification
SELV; +5VDC and +15VDC Auxiliary Outputs are SELV
Models with 60V Vout ≤ 400V: Output is Hazardous; LAN, IEEE, USB, RS-232/RS-485, Isolated Analog and J1 Remote Analog (pins 1-3, 14-16)
and +5VDC Auxiliary Output are SELV; Remote sense (all pins), J1 Remote Analog (pins 8-13, 21-25) and +15VDC Auxiliary Output are Hazardous.
Models with 400V < Vout ≤ 600V: Output is Hazardous, LAN, IEEE, USB, RS-232/RS-485, Isolated Analog, J1 Remote Analog (all pins),
Remote sense (all pins), +5VDC Auxiliary Output and +15VDC Auxiliary Output are Hazardous.
Models with Vout ≤ 40V: Input-Outputs (SELV): 4242VDC - 1minute, Input-Ground: 2828VDC - 1minute
3. Withstand voltage
Models with 40V < Vout ≤ 100V: Input (Haz)-Output (Haz): 2600VDC - 1minute; Input (Haz)-SELV: 4242VDC – 1 minute; Output (Haz)-SELV:
1900VDC - 1minute; Output (Haz)-Ground: 1200VDC – 1 minute; Input (Haz)-Ground: 2828VDC – 1 minute.
Models with 100V ≤ Vout ≤ 600V: Input (Haz)-Output (Haz): 4000VDC-1 minute; Input (Haz)-SELV: 4242VDC-1 minute; Output (Haz)-SELV: 3550VDC-
1 minute; Output (Haz)-Ground: 2670VDC - 1 minute; Input (Haz)-Ground: 2828VDC- 1 minute.
4.Insulation resistance
More than 100Mohm at 25
V
8
10
16
---
Output shut-down when power supply changes from CV to CC mode. User-presetable
---
Inverter shut-down, manual reset by AC input recycle, by OUT button or by communication port command
V
0.5~10
0.5~12
1~19
---
Preset by front panel or communication port. Prevents from adjusting Vout below limit. Does not affect Analog programming.
---
User-selectable, latched or non-latched.
---
Vout/Iout manual adjust by separate encoders (Coarse and Fine adjustment)
---
OVP/UVL manual adjust by Voltage Adjust encoder
---
Address selection by Voltage Adjust encoder. No of addresses = 31
---
Go-to-Local control
---
Output On/Off
---
AC On/Off
---
Front panel lock/unlock
---
Foldback control
---
Baud rate selection: 1200, 2400, 4800, 9600, 19200
---
Restart modes (Automatic-Restart, Safe-Start)
---
4 digits, Accuracy: +/- 0.05% of rated Output voltage +/- 1 count
---
4 digits, Accuracy: +/- 0.2% of rated Output current +/- 1 count
VOLTAGE, CURRENT, ALARM, FINE, PREVIEW, FOLDBACK, REMOTE (RS-232, RS-485, LAN, IEEE, USB), OUTPUT ON,
---
FRONT PANEL LOCK
o
0 to +50
C, 100% load
o
o
-20
C to +85
C
20% to 90% RH (no condensation)
10% to 95% RH (no condensation)
MIL_STD_810F, Method 514.5, EUT is fixed to the vibrating surface
Less than 20G, half-sine, 11ms. Unit is unpacked
Maximum 3000m (9843 ft). Derate Output current by 2%/100m (2%/328ft) above 2000m (6562ft)
Alternatively, maximum ambient temperature derated by 1
Complies with requirements of RoHS directive
Forced air flow from front to rear of unit. No ventilation holes at the top or bottom of the chassis. Variable speed fan
W:422.8, H:43.6, D:441.0 (excluding connectors, encoders, handles, etc.)
Less than 10kg (22 lbs)
Single-Phase 230VAC models: Power Combicon PC 6-16/3-GF-10, 16 Series wit h strain relief
Three-Phase 208VAC/400VAC models: Power Combicon PC 6-16/4-GF-10, 16 Series with strain relief
8V to 100V models: busbars (hole Ø 10.5mm); 150V to 600V models: Wire clamp connector, Phoenix P/N FRONT-4-H-7.62
IEC1000-4-2: Air-discharge – 8kV, Contact discharge – 4kV
IEC1000-4-4: 2kV
IEC1000-4-5: 1kV line-to-line, 2kV line-to-ground
IEC1000-4-6: 3V
IEC1000-4-3: 3V/m
IEC1000-4-8: 1A/m
EN61000-4-11
EN55022A, FCC Part 15-A, VCCI-A
EN55022A, FCC Part 15-A, VCCI-A
o
C, 70%RH
83-517-000 Rev. A
20
30
40
60
1~24
2~36
2~44
5~66
o
o
C/100m (1
C/328ft) above 2000m (6562ft)
19
80
100
150
300
5~88
5~110
5~165
5~330
600
5~660

Advertisement

Table of Contents
loading

Table of Contents