Accessories; Included Accessories; Optional Communication Cables (See Section 7.5); Ac Cables - TDK-Lambda GENESYS GEN 2400W Series Technical Manual

1.3 ACCESSORIES

1.3.1

Included Accessories

The following accessories are delivered with the power
1.3.1.1 Serial Link Cable
Serial link cable for linking power supplies by RS-485 communication (GEN/RJ45).
Cable description: 0.5m length, shielded, RJ-45 type plugs, eight (8) contacts (P/N: 15-507-201)
1.3.1.2 Hardware (delivered with power supply)

Strain Relief for AC Cord

Output terminal shield

DB25 Programming Plug kit (AMP P/N: 749809-9)

Connector plug kit, (Phoenix Contact: Plug: IMC 1, 5/7-ST-3,81, Header: IMC 1,5/7-G-3,81)
1.3.2

Optional Communication Cables (See Section 7.5)


RS-232 Cables to connect GEN to Serial Port on PC
GEN-to-PC (DB9)
GEN-to-PC (DB25)

RS-485 Cable to connect GEN to Serial Port on PC
GEN-to-PC (DB9)
1.3.3

AC Cables

AC cables are not provided with the power supply. Refer to Table 1-2 for recommended AC input cables
(customer supplied). Add a non-locking plug approved by the national safety standards of the country of usage.
AC Input Range
190-240VAC, Single-Phase
190-240VAC, Three-Phase
supply:
GEN 232/9 P/N: 15-507-203
GEN 232/25 P/N: 15-507-204
GEN/485-9 P/N: 15-507-202
Min. 3x12AWG (2 wire plus safety ground), stranded
copper, 300V, 60°C minimum, rated for 25A. 3m max.
length, outer diameter: 9~11mm.
Min. 4x14AWG (3 wire plus safety ground), stranded
copper, 600V, 60°C minimum, rated for 15A. 3m max.
length, outer diameter: 9~11mm.
Table 1-2: Recommended AC Input Cable
83-517-000 Rev. A
AC Input Cable
17