Programming And Readback; Protective Functions; Front Panel; Environmental Conditions - TDK-Lambda Genesys GEN8-300 User Manual

Programmable dc power supplies 2.4kw in 1u built in rs-232 & rs-485 interface advanced parallel operation
Hide thumbs Also See for Genesys GEN8-300:
Table of Contents

Advertisement

2.6.1 PROGRAMMING AND READBACK (RS232/485, Optional LAN/IEEE Interface)
1.Vout programming accuracy (*15)
2.Iout programming accuracy (*13)
3.Vout programming resolution
4.Iout programming resolution
5.Vout readback accuracy
6.Iout readback accuracy (*13)
7.Vout readback resolution
8.Iout readback resolution

2.7 PROTECTIVE FUNCTIONS

1.Foldback protection
2.Over-voltage protection (OVP)
3.Over-voltage trip point
4.Output under voltage limit (UVL)
5.Over temperature protection

2.8 FRONT PANEL

1.Control functions
2.Display
3.Indications

2.9 ENVIRONMENTAL CONDITIONS

1.Operating temperature
2.Storage temperature
3.Operating humidity
4.Storage humidity
5.Altitude

2.10 MECHANICAL

1.Cooling
2.Weight
3.Dimensions (WxHxD)
4.Vibration
5.Shock
10
V
8
16
---
0.05% of rated output voltage
---
0.1% of actual output current +0.2% of rated output current
---
0.002% of rated output voltage
---
0.002% of rated output current
---
0.05% of rated output voltage
---
0.3% of rated output current
% of rated
0.002%
0.007% 0.006%
0.011%
output voltage
% of rated
0.004%
0.005%
0.007% 0.009%
output current
V
8
10
16
---
Output shut-down when power supply change from CV to CC User presetable.
---
Inverter shut-down, manual reset by AC input recycle or by OUT button or by communication port command.
V
0.5~10
0.5~12
1~19
Preset by front panel or communication port. Prevents from adjusting Vout below limit. Does not affect analog
---
programming.
---
User selectable, latched or non latched.
---
Vout/Iout manual adjust by separate encoders (coarse and fine adjustment).
---
OVP/UVL manual adjust by Vout. Adjust encoder.
Address selection by Voltage Adjust encoder. No of addresses:31.
---
Go to local control.
---
---
Output on/off
---
AC on/off
---
Front panel Lock
---
Foldback control
---
Baud rate selection: 1200, 2400, 4800, 9600 and 19200.
---
Re-start modes (automatic restart, safe mode).
---
Vout:
4 digits, accuracy: 0.05% of rated output voltage +/-1count.
---
Iout:
4 digits, accuracy: 0.2% of rated output current +/-1count.
VOLTAGE, CURRENT, ALARM, FINE, PREVIEW, FOLDBACK, REMOTE(RS232,RS485,IEEE), OUTPUT ON,
---
FRONT PANEL LOCK.
o
0~50 C, 100% load.
---
o
---
-20~85 C
%
20~90% RH (no condensation).
%
10~95% RH (no condensation).
---
Maximum 3000m(10000ft). Derate output current by 2%/100m above 2000m.
Alternatively maximum ambient temp.derated by 1 C/100m above 2000m.
---
Forced air cooling by internal fans.
Kg
Less than 10Kg.
W: 422.8, H: 43.6, D: 441 (Refer to Outline drawing).
mm
MIL-810F, method 514.5
---
Less than 20G, half sine, 11mS. Unit is unpacked.
---
20
30
40
60
0.004% 0.003% 0.002% 0.002% 0.011% 0.007% 0.004% 0.002%
0.002% 0.002% 0.003% 0.004% 0.005% 0.007% 0.002% 0.003%
20
30
40
60
1~24
2~36
2~44
5~66
O
11
11
100
300
80
150
300
80
100
150
5~165
5~330
5~88
5~110
600
600
5~660

Advertisement

Table of Contents
loading

Table of Contents