Connection
5.2 Fieldbus
5.2.2
Removing the bus connector
Requirements
● Diagonal cutter
● Screwdriver (size depends on the bus connector)
Procedure
Illustration similar
1. Carefully cut through the cable ties with a diagonal cutter and remove the cable tie. Take
care that you do not damage the cable.
2. Remove the fastening screws from the bus connector.
3. Pull the bus connector of the cable out of the socket of the 3RW5 communication module.
Result
You have disconnected the 3RW5 communication module from the bus connection.
58
SIRIUS 3RW5 PROFIBUS communication module
Equipment Manual, 02/2020, A5E35633549002A/RS-AC/003