7.1.2
Status and error displays
"DIAG" LED
State
Flashes green/red
"BUS" LED
State
Flashes green/red
SIRIUS 3RW5 PROFIBUS communication module
Equipment Manual, 02/2020, A5E35633549002A/RS-AC/003
Meaning
Device exchanging data with the DP master
Lights up green
The 3RW5 soft starter is not configured.
•
The 3RW5 communication module is starting.
•
Flashes green
The 3RW5 communication module is being parameterized.
•
Factory settings are being restored
•
Hardware or firmware defective.
Lights up red
Group error (only if the 3RW5 communication module is malfunctioning)
•
Switchover from old to new firmware after firmware update
•
Flashes red
(flashes briefly)
The "node flash test" was activated.
No main power
Off
Meaning
Device performing data exchange.
Lights up green
Bus error
Lights up red
Configuring error
Flashes red
The "node flash test" was activated.
Device not performing data exchange (e.g. controller is in stop state).
•
Off
No main power
•
Messages and diagnostics
7.1 LED display
77