Bus Connection Cable And Connector - Siemens SIRIUS 3RW5 PROFIBUS Equipment Manual

3.6

Bus connection cable and connector

For connection, use only angled industrial 9-pin SUB-D bus connectors (RS 485).
Illustration similar
NOTICE
Damage to the cable, bus connector and 3RW5 communication module
If you use unsuitable bus connectors, the following can happen:
• The hinged cover of the 3RW5 soft starter does not close.
• The connecting cable is impermissibly bent.
• The bus connector or the 3RW5 communication module is damaged.
Use bus connectors with a right-angled cable outlet and dimensions that match the
recommended bus connector. Use only one bus connector. If necessary, use bus
connectors with two cable inputs.
SIRIUS 3RW5 PROFIBUS communication module
Equipment Manual, 02/2020, A5E35633549002A/RS-AC/003
3.6 Bus connection cable and connector
Description
37