Steering Assembly Legend - Husqvarna Z400 Series Service Manual

Steering Assembly Legend

1) Bellows Drive Lever RH
2) Rivet Push Pin (10 used)
3) Control Lever LH
4) Bellows Drive Lever LH
5) Controls System LH (not shown)
6) Pivot Bracket LH (not shown)
7) Arm LH (not shown)
8) Bolt (2 used)
9) Bracket Controls LH
10) Control Rod Assembly LH
11) Bolt (6 used)
12) Bracket Controls RH
13) Bolt Hex Head (8 used)
14) Controls System RH
15) Bolt Hex Head (4 used)
16) Control Lever RH
17) Nut (4 used)
18) Bolt Hex Head (2 used)
19) Bearing Flanged (2 used)
20) Clip (2 used)
21) Washer (2 used)
22) Spring (2 used)
23) Bolt Hex Head (2 used)
24) Bearing Flanged (4 used)
25) Bushing (2 used)
26) Nut (2 used)
27) Nut (12 used)
28) Retaining Clip (2 used)
NOTES:
• Controls system LH (not shown) (5) is similar to
controls system RH (14). See detail image in
Figure 8-4 on page 8-6.
• Pivot bracket LH (not shown) (6) is similar to pivot
bracket RH (44).
• Arm LH (not shown) (7) is similar to arm RH (33).
Z400 Series
29) Control Rod Assembly RH
30) Bolt (2 used)
31) Bushing RTN Controls (2 used)
32) Washer (2 used)
33) Arm RH
34) Lock Nut (4 used)
35) Washer (2 used)
36) Screw (2 used)
37) Bearing Flanged (4 used)
38) Spacer Controls (2 used)
39) Spring Controls (2 used)
40) Ring (2 used)
41) Washer (2 used)
42) Lock Nut (2 used)
43) Screw Hex Head (2 used)
44) Pivot Bracket RH
45) Nut (8 used)
46) Nut Hex Lock (2 used)
47) Switch Interlock (2 used)
48) Screw Pan Head (8 used)
49) Control Guide (2 used)
50) Nut Hex Flange (6 used)
51) Bracket Damper (2 used)
52) Bolt (4 used)
53) Stud (2 used)
54) Stud (2 used)
55) Damper (2 used)
8-7
EXPLODED VIEWS