Introduction; Prepare For The Job; Safety Notices - Husqvarna Z400 Series Service Manual

SAFETY

Introduction

Safety is an important element in any repair procedure.
Knowledge of the procedure to be performed and safe
work habits are essential to preventing death, personal
injury, or property damage. Use the following statements
as a common-sense guide to proper work and tool-use
habits.

Prepare for the Job

Preparation is essential to complete a procedure in a
safe and efficient manner.
• Wear proper clothing. Loose or baggy clothing could
become tangled.
• Use eye and face protection. Always use proper eye
and face protection to protect your eyes from flying
debris or chemical splatters.
• Wear protective footwear. Wear safety shoes to
protect your feet from falling objects.
• Remove jewelry prior to servicing electrical systems.
• Always use the correct tool for the procedure.
Improper or homemade tools can cause injury or
machine damage.
• Gather the needed parts and materials before
beginning the procedure.
• Allow machine to cool. Machine can get hot during
operation. Be sure to allow enough time for
components to cool before servicing the machine.
• Perform service in a well-lit work area. A well-lit work
area can make the job easier and safer.
• Always follow procedures and safety warnings.
Service procedures are written to be as safe and
efficient as possible. Never take shortcuts.
• Be prepared for emergencies. Accidents can happen
even under the best conditions. Fire extinguishers
and first aid kits should be well maintained and easily
accessible.
• Tie back long hair to prevent it from being pulled into
machine.

Safety Notices

Throughout this manual, the following key safety words
will be used to alert the reader of potential hazards.
Become familiar with these words and their meaning.
Take all precautions to avoid the hazards described.
!
This safety alert symbol is used to
alert you to potential hazards.
!
DANGER indicates a hazardous situation which,
if not avoided will result in death or serious
injury.
!
WARNING indicates a hazardous situation
which, if not avoided, could result in death or
serious injury.
!
CAUTION indicates a hazardous situation
which, if not avoided, could result in injury.
NOTICE is used to address practices not related
to personal injury.
1-2
DANGER
WARNING
CAUTION
NOTICE
Z400 Series