Cranking Circuit Operation Legend - Husqvarna Z400 Series Service Manual

Cranking Circuit Operation Legend

A1) Fuse Block Assembly
F1) Main 20A Fuse
F3) Clutch/Starter 15A Fuse
G1) Battery
G2) Voltage Regulator
K1) Starter Relay
K2) Motion Control Lever Relay
M1) Starter Motor
S1) Seat Switch
S2) Left Parking Brake Switch
S3) Right Parking Brake Switch
NOTES:
• Seat switch (S1) is shown in the released position.
• Left parking brake switch (S2) is shown in the
parked position.
• Right parking brake switch (S3) is shown in the
parked position.
• PTO switch (S5) is shown in the off position.
Z400 Series
S4) Key Switch
S5) Power Take-Off (PTO) Switch
X2) Left Parking Brake Interconnect
X4) Engine Connector
X6) Right Console Interconnect
X7) Right Parking Brake Interconnect
X9) Battery Positive Interconnect
X10) Battery Ground Interconnect
X11) Engine Ground
X14) Ignition Coil – Primary Side
6-37
ELECTRICAL