Figure 5-2 Dimensioned Drawing For Screw Mounting - Siemens Add 7 AddFEM Manual

Commissioning / Operation / Maintenance
Screw Mounting
For direct mounting with screws the fastening elements on the module rear have to
be removed, turned around and attached again. 4 screws M5 are used as faste-
ning elements. The hole distances are indicated in the dimensioned drawing for
screw mounting.

Figure 5-2 Dimensioned drawing for screw mounting

5-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
AddFEM
AddFEM
C79000–G8076–C900–03