Siemens Add 7 AddFEM Manual page 117

Commissioning / Operation / Maintenance
Example:
The following configurations are to be carried out for the individual operating mo-
des:
Table 5-6 Configuration of the PROFIBUS–DP addresses at the driver function block FEM_AI
Operating
mode
0
(Single)
1
(AS redundant)
2
(AddFEM
redundant)
3
(AS redundant
and AddFEM
redundant)
5-36
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
W#16#0105 means ..
PROFIBUS number = 1
Slave number of the AddFEM interface = 5
Configuration at the driver block FEM_AI
G_ADR_1A : <Address>
W#16#0105)
G_ADR_1B : 16#0
G_ADR_2B : 16#0
G_ADR_2B : 16#0
G_ADR_1A : <Address Interface A>
W#16#0105)
G_ADR_1B : <Address Interface B>
W#16#0205)
G_ADR_2A : 16#0
G_ADR_2B : 16#0
G_ADR_1A : <Address Interface A Module 1>
W#16#0105)
G_ADR_1B : 16#0
G_ADR_2A : <Adress Interface A Module 2>
W#16#0106)
G_ADR_2B : 16#0
G_ADR_1A : <Address Interface A Module 1>
W#16#0105)
G_ADR_1B : <Address Interface B Module 1>
W#16#0205)
G_ADR_2A : <Address Interface A Module 2>
W#16#0106)
G_ADR_2B : <Address Interface B Module 2>
W#16#0206)
AddFEM
and
(e.g.
(e.g.
(e.g.
(e.g.
(e.g.
(e.g.
(e.g.
(e.g.
(e.g.
AddFEM
C79000–G8076–C900–03