Siemens Add 7 AddFEM Manual page 80

AddFEM
Information in the Diagnostic Message (continued):
PROM_F
KORRDAT_F
1)
The failure of the redundancy partner is signaled at the operating mode with redundant PROFIBUS DP
2)
The diagnostic message is removed in the key switch position RUN (going diagnosis).
3)
The diagnostic message is removed in the slide switch position 1 Rest (going diagnosis).
AddFEM
C79000–G8076–C900–03
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
INT Check sum program code in the FLASH–EPROM invalidated
INT Check sum correction factors in the FLASH–EPROM invalidated
Technical Data
4-29