Individual Protection Gear; For Your Own Safety During Operation - Optimum BF 30 Vario Operating Manual

Safety
1.7

Individual protection gear

For certain work individual protection gear is required.
Protect your face and eyes
exposed to hazards, a safety helmet with a face guards should be worn.
Use protective gloves when handling pieces with sharp edges
Use safety shoes when you position, dismantle or transport heavy components
Use ear protection
Before starting work, make sure that the prescribed individual protection gear is available at the
workplace.
CAUTION!
Dirty or contaminated body protection gear can cause disease. Clean it each time after
it has been used and once a week.
1.8

For your own safety during operation

WARNING!
Before activating the drilling-milling machine, double check that this will not
endanger other people and cause damage to equipment.
Avoid any unsafe working practises:
Make sure your work does not endanger anyone.
The instructions in this manual need to be observed during assembly, handling,
mainte-nance and repair.
Use protective goggles.
Turn off the drilling-milling machine before measuring the workpiece.
Do not work on the drilling-milling machine if your concentration is reduced, for
example, because you are taking medication.
Stay on the drilling-milling machine until the working spindle has come to a complete halt.
Use prescribed protection gear. Make sure to wear a well-fitting work suit, when
neces-sary, a hairnet.
Do not use protective gloves during drilling or milling work.
Unplug the shockproof plug from the mains before changing the
tool. Use suitable devices for removing drilling and milling chips.
Make sure your work does not endanger anyone.
Clamp the workpiece tightly before activating the drilling-milling machine.
In the description of work with and on the drilling-milling machine we highlight the dangers spe-
cific to that work.
16 / 09 / 2008
: During all work and specifically work during which your face and eyes are
if the noise level (emission) in the workplace exceeds 80 dB (A).
Version 1.0.3 BF 30 Vario
OPTIMUM
M A S C H I N E N - G E R M A N Y
.
.
Drilling-Milling machine
Page 11