Unpacking And Connecting; Extent Of Supply; Transport; Storage - Optimum BF 30 Vario Operating Manual

Unpacking and connecting

3 Unpacking and connecting
INFORMATION
The drilling-milling machine comes pre-assembled.
3.1

Extent of supply

When the drilling-milling machine is delivered, immediately check that the machine has not
been damaged during shipping and that all components are included. Also check that no faste-
ning screws have come loose.
Compare the parts supplied with the information on the packaging list.
3.2

Transport

WARNING!
Machine parts falling off forklift trucks or other transport vehicles could cause very
serious or even fatal injuries. Follow the instructions and information on the
transport case:
• centres of gravity
• suspension points
• weights
• means of transport to be used
• prescribed shipping position
WARNING!
Use of unstable lifting equipment and load-suspension devices that break under load
can cause very serious injuries or even death.
Check that the lifting and load suspension gear has sufficient load capacity and that it
is in perfect condition.
Observe the rules for preventing
accidents. Hold the loads properly.
Never walk under suspended loads!
3.3

Storage

ATTENTION!
Improper storage may cause important parts to be damaged or destroyed.
Store packed or unpacked parts only under the intended environmental
conditions. „Environmental conditions" on page 14
Consult the company Optimum Maschinen Germany GmbH if the drilling-milling machine or
accessories have to be stored for a period of over three months or under different environmental
conditions to those given there.
Stand 16 / 09 / 2008 Version 1.0.3 BF 30 Vario
OPTIMUM
M A S C H I N E N - G E R M A N Y
Drilling-Milling machine
Page 17