Optimum BF 30 Vario Operating Manual page 54

OPTIMUM
M A S C H I N E N - G E R M A N Y
8.3 Warranty
Within the terms of warranty, the company Optimum warrants for a perfect quality of its products
and will reimburse any cost for overhaul or exchange of defective parts in case of construction
error, fault in material and / or defect of fabrication.
The term of warranty for commercial use is 12 months and for use as an amateur it is 24
months. Condition for a warranty claim due to construction errors, faults in material, and / or
defects of fabrication is:
•
Proof of purchase and that the instructions for use had been followed.
In order to assert the claim of warranty, you have to present a typescript original receipt of
purchase. It must comprise the complete address, date of purchase and type designation
of the product.
The instruction for use for the corresponding device as well as the safety information need to be
observed. Damages due to operator's mistakes may not be accepted as warranty claims.
•
Correct use of the devices.
The products of the company Optimum had been designed and built for certain
purposes. They are listed in the operation manual.
The warranty claim may not be accepted if the operating manual is not being followed or if
it is used for a purpose which has not been intended or with improper accessory.
•
Maintenance work and cleaning.
It is absolutely necessary to maintain and clean the machine in regular intervals according
to the prescriptions of the instruction for use.
By intervention of a third party, any warranty claim will expire. Maintenance work and
cle-aning are usually not part of the claim of warranty.
•
Original spare parts
Make sure to use only original spare parts and original accessory. This can be acquired
from authorised distributors of the machine.
When other than original parts are being used, consequential damages may occur and dan-
gerous accidents will increase. Disassembled or partially disassembled devices and
devices which are repaired with foreign parts are excluded from warranty claims.
•
Wearing parts
Certain components are subject to wear out by time respectively a standard wear by use
on the corresponding machine.
Among these components are e.g. V-belts, ball bearings, switches, mains cables,
gaskets, and washers, etc. These wearing parts are not part of the warranty.
8.4 Disposal
Disposal of used electric and electronic machines
(Applicable in the countries of the European Union and other European countries with a sepa-
rate collecting system for those devices).
The sign on the product or on its packing indicates that the product must not be handled as
common household waist, but that it needs to be delivered to a central collection point for recy-
cling. Your contribution to the correct disposal of this product will protect the environment and
the health of your fellowmen. The environment and the health are endangered by incorrect dis-
posal. Recycling of material will help to reduce the consumption of raw materials. Your District
Office, the municipal waste collection station or the shop where you have bought the product
will inform you about the recycling of this product.
8.5 RoHS , 2002/95/CE
The sign on the product or on its packing indicates that this product complies with the European
guideline 2002/95/EC .
Page 54 Drilling-Milling machine BF 30 Vario
Appendix
Version 1.0.3 Stand 16 / 09 / 2008