Possible Dangers Caused By The Drilling-Milling Machine; Qualification Of Personnel; Target Group - Optimum BF20 L Vario Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y
WARNING!
Very serious injury due to improper use.
It is forbidden to make any modifications or alterations to the operating values of the
drilling-milling machine. These could endanger the staff and cause damage to the
drilling-milling machine.
1.3

Possible dangers caused by the drilling-milling machine.

The drilling-milling machine was built using the latest technological advances.
Nonetheless there remains a residual risk, since the drilling-milling machine operates with
high revolutions,
rotating parts and tools,
electrical voltage and currents.
We have used construction resources and safety techniques to minimise the health risk to the
staff resulting from these hazards.
If the drilling-milling machine is used and maintained by staff who are not duly qualified, there
may be a risk by the drilling-milling machine resulting from incorrect operation or unsuitable
maintenance.
INFORMATION
All persons involved in assembly, commissioning, operation and maintenance must
be duly qualified,
strictly follow this operating manual.
Disconnect the drilling-milling machine whenever cleaning or maintenance work is being carried
out.
WARNING!
The drilling-milling machine may only be used with the safety devices activated.
Disconnect the drilling-milling machine whenever you detect a failure in the safety
devices or when they are not fitted!
All additional installations carried out by the operator need to incorporate the prescribed
safety devices.
This will be your responsibility being the machine operator!
"Safety devices" on page 9
1.4

Qualification of personnel

1.4.1

Target group

This manual is addressed to
the operator,
the user,
the maintenance staff.
The warning notes therefore refer to both operation and maintenance of the drilling-milling
machine.
Always disconnect the drilling-milling machine plug from the mains. This will prevent it from
being used by unauthorised staff.
Page 8 Drilling-Milling machine BF 20 Vario ; BF 20 L Vario Version 3.1.4 9 / 03 / 2010
Safety