Push Roller Arm - GRAPHTEC CE6000 Series Service Manual

6 DISASSEMBLY AND REASSEMBLY

6.2.4 Push Roller Arm

How to detach the push roller arm
(1) Detach the right side cover (See section 6.1.1.).
(2) Detach the center cover (See section 6.1.3.).
(3) Detach the push roller spring from the push roller assembly.
Push roller assembly
Push roller spring
(4) Detach the E-ring from the push roller arm shaft.
Push roller arm
Push roller shaft
Push roller arm shaft
E-ring
E-ring
Push roller
(5) Detach the push roller arm shaft from the push roller arm, and then detach the push roller arm.
How to reinstall the push roller arm
(1) Reattach the push roller arm in the reverse order in which it was detached.
CE6000-UM-251-9370 6-9