Case Conversion; Character - Balluff BVS HS-P Series Operation Manual

Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
3
Configuration Using Barcodes
Case
Conversion

Character

Conversion
68
This feature allows conversion of the case of all alphabetic characters to upper or lower case.
Case conversion affects ONLY readed barcode data, and does not affect
Label ID, Prefix, Suffix, or other appended data.
NOTE
DEFAULT
$CLF-
Case Conversion = Convert to upper case
Character conversion is an eight byte configuration item. The eight bytes are 4 character pairs
represented in hexadecimal ASCII values. The first character in the pair is the character that will
be converted. The second character in the pair is the character to convert to. If the character to
convert in a pair is FF, then no conversion is done.
If less than the expected string of 16 characters are selected, scan the
ENTER/EXIT barcode twice to accept the selections and exit Programming
Mode.
NOTE
DEFAULT
$CLF-
Case Conversion = Disable (no case conver-
sion)
$CLF-
Case Conversion = Convert to lower case
$CLFCH
Configure Character Conversion
0xFFFFFFFFFFFFFFFF
(No character conversion)