Real Time Clock (Rtc) Configuration; Current Date; Current Time - Balluff BVS HS-P Series Operation Manual

Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
3
Configuration Using Barcodes
3.11.6 Real Time Clock
(RTC)
Configuration

Current Date

Current Time

220
Sets the date of the internal Real Time Clock (RTC)
$CDYMD
Set Current Date = YYMMDD
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You
can then start again at the beginning.
Sets the time of the internal Real Time Clock (RTC). HH = 24 hours format
$CTHMS
HHMMSS
Set Current Time =
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You
can then start again at the beginning.
To configure this feature, scan the ENTER/
EXIT PROGRAMMING MODE barcode
above, then the barcode at left followed by
the digits from the Alphanumeric characters
in Appendix D: Keypad representing your
desired character(s). End by reading the
ENTER/EXIT barcode again.
~
CANCEL
To configure this feature, scan the ENTER/
EXIT PROGRAMMING MODE barcode
above, then the barcode at left followed by
the digits from the Alphanumeric characters
in Appendix D: Keypad representing your
desired character(s). End by reading the
ENTER/EXIT barcode again.
~
CANCEL