Nak Character On Page - Balluff BVS HS-P Series Operation Manual

Balluff BVS HS-P Family
Industrial Handheld Bar Code Readers
3
Configuration Using Barcodes
ACK Character
NAK Character
40
This setting specifies an ASCII character or hex value to be used as the ACK character. ASCII
characters or any hex value from 0 to 0xFF can be selected. See
Setting to previously defined characters such as XON, XOFF, or host commands
conflicts with normal operation of these characters. 8-bit data is not recognized
when the option
NOTE
$CR2AC
Select ACK Character Setting
DEFAULT
This setting specifies an ASCII character or hex value to be used as the NAK character. ASCII
characters or any hex value from 0 to 0xFF can be selected.
Setting to previously defined characters such as XON, XOFF, or host commands
conflicts with normal operation of these characters. 8-bit data is not recognized
when the option
NOTE
See page 241 for more information.
CR2NA
Select NAK Character Setting
DEFAULT
Data Bits has been set as 7 Data Bits.
0x06 'ACK' Character
Data Bits has been set as 7 Data Bits.
0x15 'NAK' Character
page 240 for more information.