Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
3
Configuration Using Barcodes
3.11.2 Configuration
Updates
Automatic
Configuration
Update
$CCpyCfg2HH
Copy
Configuration to
reader
Copy
Configuration to
Base Station
214
See
page 270
in "References" for detailed information and examples of these features.
When this feature is enabled, a reader and its linked Base Station can automatically ensure they
stay in sync with regard to application hardware and/or configuration. See
information on this feature.
$CBT-
Automatic Configuration Update = Enable
Scan the following label to copy the current Base Station configuration to the reader. Use this
method when the Auto Configuration Update feature is disabled and you want a one-time config-
uration update to be performed on the reader.
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this barcode.
NOTE
CpyCfg2HH
Scan the following label to copy the current reader configuration to the Base Station. Use this
method when the Auto Configuration Update feature is disabled and you want a one-time config-
uration update to be performed on the Base Station.
Cpycfg2Ba
Copy Configuration to Base Station
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this barcode.
NOTE
$CBT-
Automatic Configuration Update = Disable
Copy Configuration to Reader
page 270
for more
DEFAULT